Typhoon 2
Innovated model with two entrances and vestibules and with two crossbars. The vestibules are high enough, the stiffness of the structure predetermines the tent for use even in more demanding conditions.
Rain fly is made of Polyester with a polyurethane coating, which gives it a water column with a height of 4,000 mm. Seams are taped with heating tape to prevent leaks.
The floor is made of layered Polyethylene with Rip-Stop treatment.
The tent polse consist of laminate segments with a diameter of 8.5 (main rods) and 9.5 mm (atrial support).
Technical specification
| Features: | |
| Weight | 4.3 kg |
| Weight without inner tent | 3.2 kg |
| Package Size | ⌀22 x 45 cm |
| Number of people | 2 - 3 |
| Amount of entrances | 2 |
| Construction type | Cupola |
| Amount of vents | 2 |
| Number of poles / crossing points | 4 / 5 |
| Buildable without a bedroom | Yes |
| Height of tent (bedroom) | 124 (115) cm |
| Siliconised | No |
| Taped seams | Yes |
| Number of pins | 16 |
| Category | Trekking |
| Material | |
| Material of poles | Fiberglass |
| Pole diameter | 9.5 mm |
| Flysheet material | Polyester, PU coating 4 000mm H2O |
| Groundsheet material | Layered Polyethylene Rip-Stop |
Description
The tent is double-layered and consists of an inner tent and an outer layer – rain fly. The inner tent has a rectangular floor plan with two entrances on its longer sides. The outer tent is octagonal, it also has two entrances, in which there are two vestibules, suitable for storing luggage, for example.
Ventilation
It is located at the top of the dome of the rain fly. The canopies of the ventilation windows are shaped so that they are not tilted by the wind, if necessary they can be closed with Velcro. This prevents leakage even during rain with strong wind.
Building a tent
Put the tent poles of the structure through the sleeves outside the rain fly and insert the ends of the tent poles into the brass eyes on the loops of the lower edge of the rain fly. Then we fasten the buckles on the straps and on the ground inside the tent and the rain fly is set up. We fasten the inner tent to the loops on the inside of the rain fly. We anchor the erected tent with pegs and cords and fasten it with plastic clips.
